Live webinar to transfer timely, well documented, Corrective / Preventive Action program to validate an effective CAPA FDA system capable of identifying and rectifying potential problems as part of the Continuous Quality Improvement program.
New Hyde Park, NY, August 16, 2015 –(PR.com)– Overview: CAPA (Corrective and Preventative Actions) did not originate in the Pharmaceutical and Medical Device industry or the Automobile Industry as most folks post on the Internet. The program to make effective corrections and ensure that preventative applications were incorporated was in use way back in the 60s by NASA and the FAA to enhance safety but was not labeled CAPA even though the intent was the same.
A timely, well documented, Corrective / Preventive Action program validates a quality system that is not only capable of identifying potential problems but also effectively correcting problems when incidents do occur and as part of the Continuous Quality Improvement program, correcting potential problems prior to occurrence. Adequate incident tracking is the primary foundational element for an effective CAPA FDA.
“Proper” completion of the required forms in the “proper” order as described in the corporate directives and site procedures is what is required to remediate and prevent future observations by auditors and inspectors who have found numerous implementation issues and execution as result of variances in overall comprehension (failure to establish and maintain an adequate CAPA program). Examples are presented during the presentation.
Why Should You Attend:
A vast majority of the current industry deficiencies which have led to isolated 483s, Warning Letters and Consent Decrees are the result of deficient technical documentation and effective means of assessing various elements of CAPA expectations for products produced and distributed under the FDA approval process.
How do you know that your FDA CAPA training procedure(s) that address the requirements of the quality system regulation have been technically defined, documented and implemented to determine if appropriate sources of product and quality assurance are being identified and that the data from these sources are being analyzed and documented in an easy to understand technical report to identify existing product and quality problems that may require corrective action and/or preventative action?
Areas Covered in this Webinar:
• PROPER – Too often regulatory documents are written using subjective terminology and grammar (first person, pronouns and adverbs) instead of objective, technical descriptions of the element being addressed (stick to the facts). Lack of technical writing skills has contributed to the majority of the current submission rejections, 483s, warning letters and consent decrees – see FDA examples at end of presentation. GMP controlled documents must be written in a way that will be clear to the jury when presented in a court case, as opposed to writing like “we are having a conversation.” Who in this case is “we”, the head of quality or a janitor? How to determine if sources of product and quality information that may show unfavorable trends have been identified as well as confirming that data from tracking system, complaint handling or other sources are organized to identify potential product and quality problems that may require preventive action that would be easily understood by a third party reviewer (FDA inspector).
• CAPA – Implementing an effective corrective actions or preventive action capable of meeting QS Regulations and satisfying quality assurance and GMP/GDP documentation requirements is accomplished in nine basic steps. The order of the listed activities is critical and all too often not followed in the specified sequence which has a negative effect when CAPA systems are inspected. Need to understand the difference between correction and corrective action.
• Identification of the incident – Criticality of the Incident Tracking System separate from deviation tracking.
• Evaluation of the impact or magnitude of the incident
• Initiation and Risk Assessment to demonstrate compliance with Quality Systems Regulations
• Investigation procedure to assess various strategies in accordance with current regulatory expectations
• Root Cause Analysis training by avoiding subjective thinking to generate objective documentation
• Action Plan generation listing the tasks, metric applications and acceptance criteria for each activity
• Implementation Plan example needed to accomplish the Corrective or Preventive Action Plan
• Verification using stand alone documentation practices of for objective evidence to meet cGMP regulations
• Effectiveness monitoring plan to demonstrate the corrective action and/or preventive action is performing as anticipated preventing reoccurrence or initial occurrence of the identified issue.
Who Will Benefit:
• Quality and Documentation Personnel
• Operations and Development
For more information, please visit https://www.complianceglobal.us/product/700176
About Compliance Global Inc:
Compliance Global Inc; is a training (webinar) organization based in New Hyde Park, New York, providing world-class compliance trainings and online webinars by leveraging a pool of experienced speakers / consultants in the Pharmaceutical, Bio-Technology, Medical Devices, Clinical Compliance, FDA Compliance, Healthcare, BFSI, Life Science & HR streams for improving the knowledge base of the customers. Our trainings are contemporary, simple and cost-effective with easy access and great delivery experience. Compliance Global is a multifaceted entity, an absolute knowledge repository.
Our varied industry expertise ranges across Life Science (Pharmaceutical, Bio-Technology, Medical Devices, Clinical Compliance, FDA Compliance), Healthcare, HR Compliance, BFSI, Food & Dietary Supplements, Insurance, Accounting & Taxation and other Cross Industry streams.
Toll Free: +1-844-746-4244
Compliance Global Inc.
Toll Free: +1-844-746-4244